Tricone Drill Bits For Underground Mine And Water Well Drill Bits For Mining& Energy Industries
$500.00
Tricone drill bits: A tricone bit comprises three conical rollers with teeth made of a hard material, such as tungsten carbide. The teeth break rock by crushing as the rollers move around the bottom of the borehole.
PDC drill bits: A PDC bit has no moving parts and works by scraping the rock surface with disk-shaped teeth made of a slug of synthetic diamond attached to a tungsten carbide cylinder
PDC drag bit: A drag bit is a comprehensive drilling bit, mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling.
Features:
1. API 7-1 Standard connection
2. Tricone bit is suitable for any rock formation.
3. Tricone bit is versatile and can handle changing formations.
4. PDC Main cutters are high performance PDC cutters to insure service life of the bit while improving ROP.
5. Hydraulic system of the bit is optimized using dynamic flow pattern simulation technology to enhance cleaning and cooling effects of the bit to effectively prevent bit from balling.
Specifications:
PDC Drill Bits
|
Model |
PDC Bit, PDC Drag Bit |
|
Bit Size: |
4-1/2″ ~ 17–1/2” (114mm ~ 444.5mm) |
|
Blades: |
3 ~ 9 blades |
|
Nozzles: |
according to customers’ requirement |
|
Cutters Size: |
1313, 1613, 1616, 1913, 1916, 1919 |
|
Material: |
Carbide |
|
WOB (KN/mm): |
0.35 ~ 0.90 |
|
Rotary Speed (rpm): |
300 ~ 800 |
|
Customized: |
Please provide bit size, blade QTY., cutter type etc. |
Tricone Drill Bits
|
Model |
TCI Bit, Steel Teeth Bit |
|
IADC CODE |
116 117 12 6127 136 137 216 217 226 226 316 317 326 327 336 337 115 125 135 215 225 235 315 325 335 114 124 214 314 111 121 131 346 347 |
|
417 427 437 517 527 537 617 627 637 737 837 832 415 425 435 445 525 625 635 416 427 436 446 447 516 526 537 547 516 536 535 |
|
|
Available sizes |
From 2–7/8 to 26” larger sizes for hole opener bit ,reamer bit |
|
Bearing type |
Sealed bearing and non-sealed bearing HJ(metal sealed journal bearing) HA (rubber sealed journal bearing Air cooled bearing type |
|
Formation or layer |
Soft ,medium soft ,hard, medium hard, very hard formation |
|
Button size (extra features) |
1. Y-Conical teeth 2. X-chisel teeth 3. K- wide teeth 4. G- Gauge protection |
|
Material |
Alloy steel, Carbide |
|
Customized |
Please provide bit size, IADC code/formation etc. |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
General Inquiries
There are no inquiries yet.
Related products
API 6A 3000- 7500 PSI wellhead equipment Mud Gate Valves for oil
FC valve
1. Full-bore design, effectively eliminate the pressure drop and eddy current, slow flow of solid particles in the valve.
2. The unique sealing, make the switch torque greatly reduced
3. Between bonnet & body and gate & seat are adopt metal to metal seal
4. Between gate and seat are adopt metal to metal seal, Surface spraying (heap) welding hard alloy , has good abrasion resistance, corrosion resistance.
5. Seat ring is fixed with plate, keep well steady
6. Stem has back seal structure so as to replace seal ring of stem with pressure
7. There is seal grease injection valve on bonnet side so as to repair seal grease , and provided seal and lubricate performance of gate and seat
8. It is match with all kind of pneumatic (hydraulic) actuator as customer's requirements
Expanding gate valve
1. Gate is fission expanding structure
2. Realizing low torque or low wear during switch
3. Between bonnet and body are adopt metal to metal seal
API hign quality High Pressure Flanged End Swing Check Valve for oilfield
API 6A Check Valve, also referred to non-return valve, or one-way valve, is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. We can produce both swing type check valve and lift type check valve. Available in bore sizes from 1-13/16" to 7-1/16" and pressure ratings from 2,000 to 15,000 PSI. The standard material is forged AISI4130 alloy. All of our Check Valves are fully designed, manufactured, and tested as per API 6A and API 16C standards and have been widely used on oilfield wellhead Christmas tree and manifolds with reliable performance.
API Standard Mud Pump Valve Assembly for Mud Pump Parts
Mud Pump Parts Valve assembly/Valve body/Valve seat
1.The valve body and valve seat of valve assembly are made from high-quality knot steel treated with 20CrMnTi carburizing and
quenching processes.
2.The surface hardness is greater than HRC 60.
3.The conical surface is ground finished to ensure a high requirement for roughness and geometric dimension.
4.The rubber sheet is made of polyurethane material which improves the service life of valve assembly, the operational use time is more than 300 hours.
High Quality Alloy Drill Bit Tricone Drilling Bit
PDC drill bits: A PDC bit has no moving parts and works by scraping the rock surface with disk-shaped teeth made of a slug of synthetic diamond attached to a tungsten carbide cylinder
PDC drag bit: A drag bit is a comprehensive drilling bit, mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling.
Mud Pump Spare Parts – Bimetallic/Ceramic Liner
Mud pump spare parts as one of the expendables what need to be replaced frequently in drilling service, the quick matching, high quality and competitive price will be ensured from Lake Petro. Our products are 100% interchangeable with the original equipment manufacturer in every way. The parts name and model will be detailed in the following sections.
