API hign quality High Pressure Flanged End Swing Check Valve for oilfield
$680.00
API 6A Check Valve, also referred to non-return valve, or one-way valve, is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. We can produce both swing type check valve and lift type check valve. Available in bore sizes from 1-13/16″ to 7-1/16″ and pressure ratings from 2,000 to 15,000 PSI. The standard material is forged AISI4130 alloy. All of our Check Valves are fully designed, manufactured, and tested as per API 6A and API 16C standards and have been widely used on oilfield wellhead Christmas tree and manifolds with reliable performance.
Features:
1.Sealing is energized by flow fluid pressure, sealing performance gets better while pressure increasing.
2.Hard-faced sealing surface and sulfur-resistant core material assure fine performance of wear-resistant and corrosion-resistant.
3.Integral forged body with fine mechanical properties.
4.Check valve shall be hydro tested prior to delivery for safe performance.
Specifications:
Product Name: API 6A Swing Check Valve, Lift Check Valve, One-Way Valve, Non-Return Valve
Nominal Bore: 1-13/16″ – 7-1/16″
Material: AISI 4130 (Integral Forged)
End Connection: API 6A Flange
Standards Applied: API Spec 6A, API 16C, NACE MR0175
Pressure Rating: 2000 PSI to 15000 PSI
Material Class: AA, BB, CC DD, EE, FF
Temp Class: L, P, R, S, T, U, V
Performance Requirement: PR1, PR2
Product Specification Level: PSL1, PSL2, PSL3, PSL4
Paint Color: Red or Customized
Application: Mud Choke Manifold, Kill Manifold, Wellhead Christmas Tree Connection
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
General Inquiries
There are no inquiries yet.
Related products
API Standard Mud Pump Valve Assembly for Mud Pump Parts
Mud Pump Parts Valve assembly/Valve body/Valve seat
1.The valve body and valve seat of valve assembly are made from high-quality knot steel treated with 20CrMnTi carburizing and
quenching processes.
2.The surface hardness is greater than HRC 60.
3.The conical surface is ground finished to ensure a high requirement for roughness and geometric dimension.
4.The rubber sheet is made of polyurethane material which improves the service life of valve assembly, the operational use time is more than 300 hours.
Casing Centralizer
Casing Centralizer is a device used to place the casing at the center of the hole so as to improve the efficiency of the cementing. It is an important device because if the Casing Centralizer touches the formation at any part of the hole, then cement slurry does not pass through the area of the contact resulting in a poor cementing job.
High Quality Alloy Drill Bit Tricone Drilling Bit
PDC drill bits: A PDC bit has no moving parts and works by scraping the rock surface with disk-shaped teeth made of a slug of synthetic diamond attached to a tungsten carbide cylinder
PDC drag bit: A drag bit is a comprehensive drilling bit, mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling.
Mud Pump API Bearing
Mud Pump Spare Parts – Bimetallic/Ceramic Liner
Mud pump spare parts as one of the expendables what need to be replaced frequently in drilling service, the quick matching, high quality and competitive price will be ensured from Lake Petro. Our products are 100% interchangeable with the original equipment manufacturer in every way. The parts name and model will be detailed in the following sections.
Oil Drill BOP Control System Bottles for Accumulator Wellhead BOP Control Unit
Accumulator unit for BOP stacks is a very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. It consists of remote control system, driller’s panel, air cable (except electrical type), pipe rack (electrical warming system available for cold area), high pressure manifold, protection room, etc.
