API 7K F-1000 triplex drilling Mud Pump and spare parts
$100,000.00
Lake Petro提供符合API规范,符合国际标准和要求的泥浆泵。我们的产品广泛用于油井和水井的钻井和压裂,包括:F系列,P系列,NB系列,BW系列和TWS系列。
10000 in stock
F系列泥浆泵行程更长,行程更低,有效提高了供水性能,延长了消耗性物料的使用寿命
流体中的部分大大结束。
动力端采用强制润滑和飞溅润滑的组合润滑系统。可靠的润滑,促进动力端的使用寿命。
该系列泥浆泵严格按照API Spec 7k《钻井修复设备规范》制造,出厂时进行相应检测。
参数:
型 |
F-500战斗机 |
F-800战斗机 |
F-1000战斗机 |
F-1300战斗机 |
F-1600战斗机 |
类型 |
三联单作用 |
三联单作用 |
三联单作用 |
三联单作用 |
三联单作用 |
额定功率 |
373千瓦 500马力 |
596千瓦 800马力 |
735千瓦 1000马力 |
969千瓦 1300马力 |
1193千瓦 1600马力 |
额定转速 |
165 SPM |
150 SPM |
140 SPM |
120 SPM |
120 SPM |
行程(毫米/英寸) |
190/7 1/2″ |
228.6/9″ |
254/10″ |
305/12″ |
305/12″ |
最大衬垫直径 |
170/6 3/4″ |
170/6 3/4″ |
170/6 3/4″ |
180/7″ |
180/7″ |
齿轮类型 |
交叉缝式 |
交叉缝式 |
交叉缝式 |
交叉缝式 |
交叉缝式 |
阀罐 |
API-5 |
API-6 |
API-6 |
API-7 |
API-7 |
齿轮比 |
4.286:1 |
4.185:1 |
4.207:1 |
4.206:1 |
4.206:1 |
吸入口 |
203/8″ |
254/10″ |
305/12″ |
305/12″ |
305/12″ |
排放口 |
4“法兰 5000 磅/平方英寸 |
5“法兰 5000 磅/平方英寸 |
5“法兰 5000 磅/平方英寸 |
5“法兰 5000 磅/平方英寸 |
5“法兰 5000 磅/平方英寸 |
润滑 |
强制& 溅 |
强制& 溅 |
强制& 溅 |
强制& 溅 |
强制& 溅 |
最大压力 |
27.2兆帕 3945 磅/平方英寸 |
34.5兆帕 5000 磅/平方英寸 |
34.5兆帕 5000 磅/平方英寸 |
34.5兆帕 5000 磅/平方英寸 |
35兆帕 5080 磅/平方英寸 |
外形尺寸(英寸) |
144*106*86 |
156*79*66 |
163*89*70 |
174*121*78 |
181*129*106 |
重量(公斤) |
9770 |
14500 |
18790 |
24572 |
24791 |
注:1额定值基于 100% 容积效率和 90% 机械效率。
2推荐的行程和输入功率在连续运行下。
Weight | 19000 kg |
---|


MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
General Inquiries
There are no inquiries yet.
Related products
00:00 00:41 View larger image Add to Compare Share API Spec 8A/8C Sucker Rod Elevators for Tube Gripping
ANSI 4130 10000PSI Weld Neck Flange
API 6A Weld Neck Flanges are pipe flanges attach by welding the pipes to the neck of the flanges. This transfers stress from the flange to the pipe instead. It also reduces the stress concentration from the base of the hub. Welding neck flanges remove stress concentration and allow full working pressure and they are often used for high pressure applications. The inside diameter of the flange is designed to match the pipe's inside diameter. Weld neck pipe flanges are typically provided with a raised face, flat face, or RTJ facing.
API 6A 3000- 7500 PSI wellhead equipment Mud Gate Valves for oil
FC valve
1. Full-bore design, effectively eliminate the pressure drop and eddy current, slow flow of solid particles in the valve.
2. The unique sealing, make the switch torque greatly reduced
3. Between bonnet & body and gate & seat are adopt metal to metal seal
4. Between gate and seat are adopt metal to metal seal, Surface spraying (heap) welding hard alloy , has good abrasion resistance, corrosion resistance.
5. Seat ring is fixed with plate, keep well steady
6. Stem has back seal structure so as to replace seal ring of stem with pressure
7. There is seal grease injection valve on bonnet side so as to repair seal grease , and provided seal and lubricate performance of gate and seat
8. It is match with all kind of pneumatic (hydraulic) actuator as customer's requirements
Expanding gate valve
1. Gate is fission expanding structure
2. Realizing low torque or low wear during switch
3. Between bonnet and body are adopt metal to metal seal
API Casing Cup Tester
Casing Cup Tester is mainly used for the pressure test on the casing string and blowout preventer stack. All of the oil (gas and water) well has been running in hole with casing and has been installing the mouth of wellhead equipment, to test pressure delamination one—off for casing and control blowout pressure system, also can be used to test pressure for casing at well site pipe yard. Test pressure very easy, provided the test pressure tool put in the casing.
API certified mud pump piston assy mud pump polyurethane piston assembly
Piston assembly is the major part of the mud pump fluid end. The discharge pressure of mud pump is generated by the up-and-down motion of the piston in the cylinder.
Our liners can be used in various drilling operation conditions. Double metal liner coat used in forging steel production, inner the coat of premium liners is made from forged blank. Endotheca is made of the centrifugal casting high chromium materials, and the inner sleeve reach HB285-330 after normalizing. Honing roughness can reach more than Ra0.8 after grinding. Our product has the characteristics of the wear resistance, corrosion resistance,high precision and long service life. Our products can be fitted to all souts of conditions.
API hign quality High Pressure Flanged End Swing Check Valve for oilfield
API 6A Check Valve, also referred to non-return valve, or one-way valve, is a valve that normally allows fluid (liquid or gas) to flow through it in only one direction. An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. We can produce both swing type check valve and lift type check valve. Available in bore sizes from 1-13/16" to 7-1/16" and pressure ratings from 2,000 to 15,000 PSI. The standard material is forged AISI4130 alloy. All of our Check Valves are fully designed, manufactured, and tested as per API 6A and API 16C standards and have been widely used on oilfield wellhead Christmas tree and manifolds with reliable performance.
High Quality Alloy Drill Bit Tricone Drilling Bit
PDC drill bits: A PDC bit has no moving parts and works by scraping the rock surface with disk-shaped teeth made of a slug of synthetic diamond attached to a tungsten carbide cylinder
PDC drag bit: A drag bit is a comprehensive drilling bit, mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling.
Oil Drill BOP Control System Bottles for Accumulator Wellhead BOP Control Unit
Accumulator unit for BOP stacks is a very important equipment which controls BOP stacks and gate valves controlled by hydraulic pressure especially in drilling and workover operations. It is necessary to accurately operate and maintain the hydraulic control system. It consists of remote control system, driller’s panel, air cable (except electrical type), pipe rack (electrical warming system available for cold area), high pressure manifold, protection room, etc.