00:00 00:28 View larger image Add to Compare Share API 6A Oilfield Equipment Wellhead Casing /tubing Drilling Spool Casing/tubing Head Well Drilling Oil Field Forging
$2,500.00
Tubing head is a spool with flange top, flanged bottom and two side outlets. It also can be called tubing spool. Top flange is equipped with lock screws to fix tubing hanger. Tubing head is installed on top of casing head, which consists of body housing and tubing hanger. It can hang tubing string and seal the annular space between tubing and production casing. Our company can manufacturer tubing head with standard structure, which includes tubing hanger installed on the cone of body housing. Tubing hanger can be tapped with BPV thread as per request.
Features:
1. Fabricated with BT technology seal and could be field mounted by cutting casing pipe to accommodate the seal height.
2. Tubing hanger and top flange are designed to run cable through.
3. Several control ports are available for connecting pipeline.
4. Made of forged or special smelt steel, providing high bearing strength, safety and reliability.
Specifications:
Working Pressure: 2000 psi~15000 psi (14 Mpa ~105 Mpa)
Working Medium: crude oil, natural, mud
Temperature Ratings: -46~121℃(LU)
Material Class: AA~HH
Product specification levels: PSL1~PSL4
Performance levels: PR1~PR2
|
Top flange |
Surface casing |
Intermediate casing |
Production casing |
|
11″-35MPa |
13 3/8″ |
9 5/8″ |
7″ |
|
5 1/2″ |
|||
|
11″-70MPa |
13 3/8″ |
9 5/8″ |
7″ |
|
5 1/2″ |
|||
|
11″-105MPa |
20″13 3/8″ |
9 5/8″ |
7″ |
|
5 1/2″ |
|||
|
13 5/8″-35MPa |
13 3/8″ |
9 5/8″ |
7″ |
|
5 1/2″ |
|||
|
13 5/8″-70MPa |
13 3/8″ |
9 5/8″ |
7″ |
|
9 5/8″ |
|||
|
13 5/8″-105MPa |
20″ |
13 3/8″ |
7″ |
|
5 1/2″ |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
General Inquiries
There are no inquiries yet.
Related products
API Casing Cup Tester
Casing Cup Tester is mainly used for the pressure test on the casing string and blowout preventer stack. All of the oil (gas and water) well has been running in hole with casing and has been installing the mouth of wellhead equipment, to test pressure delamination one—off for casing and control blowout pressure system, also can be used to test pressure for casing at well site pipe yard. Test pressure very easy, provided the test pressure tool put in the casing.
Casing Centralizer
Casing Centralizer is a device used to place the casing at the center of the hole so as to improve the efficiency of the cementing. It is an important device because if the Casing Centralizer touches the formation at any part of the hole, then cement slurry does not pass through the area of the contact resulting in a poor cementing job.
High Quality Alloy Drill Bit Tricone Drilling Bit
PDC drill bits: A PDC bit has no moving parts and works by scraping the rock surface with disk-shaped teeth made of a slug of synthetic diamond attached to a tungsten carbide cylinder
PDC drag bit: A drag bit is a comprehensive drilling bit, mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling.
Mud Pump Spare Parts – Bimetallic/Ceramic Liner
Mud pump spare parts as one of the expendables what need to be replaced frequently in drilling service, the quick matching, high quality and competitive price will be ensured from Lake Petro. Our products are 100% interchangeable with the original equipment manufacturer in every way. The parts name and model will be detailed in the following sections.
Tricone Drill Bits For Underground Mine And Water Well Drill Bits For Mining& Energy Industries
Tricone drill bits: A tricone bit comprises three conical rollers with teeth made of a hard material, such as tungsten carbide. The teeth break rock by crushing as the rollers move around the bottom of the borehole.
PDC drill bits: A PDC bit has no moving parts and works by scraping the rock surface with disk-shaped teeth made of a slug of synthetic diamond attached to a tungsten carbide cylinder
PDC drag bit: A drag bit is a comprehensive drilling bit, mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling.
