00:00 00:28 View larger image Add to Compare Share API 6A Oilfield Equipment Wellhead Casing /tubing Drilling Spool Casing/tubing Head Well Drilling Oil Field Forging $2,500.00
Back to products
API 16A Double Ram Bop/Blowout Preventer $20,000.00
Click to enlarge

API 6A 3000- 7500 PSI wellhead equipment Mud Gate Valves for oil

FC valve 

1. Full-bore design, effectively eliminate the pressure drop and eddy current, slow flow of solid particles in the valve.
2. The unique sealing, make the switch torque greatly reduced
3. Between bonnet & body and gate & seat are adopt metal to metal seal
4. Between gate and seat are adopt metal to metal seal, Surface spraying (heap) welding hard alloy , has good abrasion resistance, corrosion resistance.
5. Seat ring is fixed with plate, keep well steady
6. Stem has back seal structure so as to replace seal ring of stem with pressure
7. There is seal grease injection valve on bonnet side so as to repair seal grease , and provided seal and lubricate performance of gate and seat
8. It is match with all kind of pneumatic (hydraulic) actuator as customer’s requirements

Expanding gate valve
1. Gate is fission expanding structure
2. Realizing low torque or low wear during switch
3. Between bonnet and body are adopt metal to metal seal 

$2,400.00

Compare

Guaranteed Safe Checkout

Features & Compatibility

Features:

1.Sealing for Body and cover is metal to metal seal, improve the sealing performance.

2.stem and cover designed with backseat sealing structure is easy to take pressure change

valve stem packing.

3.The body is made of high quality alloy steel forgings, no perforation design, safe and reliable.

4.Sealing surface spray weld hard alloy, with corrosion resistance, resistance to erosion and wear resistance performance.

5.Body pad ring groove can according to user requirements overlaying austenitic stainless steel, improve the corrosion resistant ability; To enhance its service life.

6.Use spring preload load in the disc and seat, completely realize two-way seal.

 

 

Specifications:

Working pressure ：2000PSI～20000PSI
Nominal bore ：1.13/16″～9″ (46mm～230mm)
Working medium : oi , nature gas , mud , consist of H2S CO2gas 

Working temp.：-46℃ ~ 121℃ (LU)
Material：AA、BB、CC、DD、EE、FF、HH
PSL：PSL1～4
PR：PR1～2

SHOW MORE

Additional information

Customer Reviews

Related Products

00:00 00:28 View larger image Add to Compare Share API 6A Oilfield Equipment Wellhead Casing /tubing Drilling Spool Casing/tubing Head Well Drilling Oil Field Forging

Store:  Dongying Lake Petroleum Technology CO Ltd
$2,500.00

Tubing head is a spool with flange top, flanged bottom and two side outlets. It also can be called tubing spool. Top flange is equipped with lock screws to fix tubing hanger. Tubing head is installed on top of casing head, which consists of body housing and tubing hanger. It can hang tubing string and seal the annular space between tubing and production casing. Our company can manufacturer tubing head with standard structure, which includes tubing hanger installed on the cone of body housing. Tubing hanger can be tapped with BPV thread as per request.

Add to cart
Quick view

ANSI 4130 10000PSI Weld Neck Flange

Store:  Dongying Lake Petroleum Technology CO Ltd
$150.00

API 6A Weld Neck Flanges are pipe flanges attach by welding the pipes to the neck of the flanges. This transfers stress from the flange to the pipe instead. It also reduces the stress concentration from the base of the hub. Welding neck flanges remove stress concentration and allow full working pressure and they are often used for high pressure applications. The inside diameter of the flange is designed to match the pipe's inside diameter. Weld neck pipe flanges are typically provided with a raised face, flat face, or RTJ facing.

Add to cart
Quick view

API Casing Cup Tester

Store:  Dongying Lake Petroleum Technology CO Ltd
$900.00

Casing Cup Tester is mainly used for the pressure test on the casing string and blowout preventer stack. All of the oil (gas and water) well has been running in hole with casing and has been installing the mouth of wellhead equipment, to test pressure delamination one—off for casing and control blowout pressure system, also can be used to test pressure for casing at well site pipe yard. Test pressure very easy, provided the test pressure tool put in the casing.

Add to cart
Quick view

API Fishing Taper Taps and Die Collar

Store:  Dongying Lake Petroleum Technology CO Ltd
$290.00

Die collar is a special external fishing tool which is engaged on the outside wall of tubing objects such as oil tubing and drill pipe. It can be used in fishing cylindrical objects without inner bore or stucked inner bore.

Add to cart
Quick view

API Mud Pump Parts Valve Seat Valve Body Valve Assy for Oilfield

Store:  Dongying Lake Petroleum Technology CO Ltd
$220.00

Mud pump spare parts as one of the expendables what need to be replaced frequently in drilling service, the quick matching, high quality and competitive price will be ensured from Lake Petro. Our products are 100% interchangeable with the original equipment manufacturer in every way.

Add to cart
Quick view

Tricone Drill Bits For Underground Mine And Water Well Drill Bits For Mining& Energy Industries

Store:  Dongying Lake Petroleum Technology CO Ltd
$500.00

Tricone drill bits: A tricone bit comprises three conical rollers with teeth made of a hard material, such as tungsten carbide. The teeth break rock by crushing as the rollers move around the bottom of the borehole.

PDC drill bits: A PDC bit has no moving parts and works by scraping the rock surface with disk-shaped teeth made of a slug of synthetic diamond attached to a tungsten carbide cylinder

PDC drag bit: A drag bit is a comprehensive drilling bit, mainly used for water wells, mining, geothermal, environmental and exploration drilling. It is suitable for drilling in soft and soft-medium formations with fast penetration rate and high efficiency, and special for the large diameter holes’ drilling. 

Add to cart
Quick view