Medium Density Polyethylene (MDPE ROTOMOLDING)
**This product is available in different Grades as well as from different Manufacturers. You can see these products at the ADDITIONAL INFORMATION (The next tab)**
*Check the ADDITIONAL INFORMATION and We are ready to provide this product for you, with your special requested analysis*
Description
Medium Density Polyethylene (MDPE ROTOMOLDING)
Medium Density Polyethylene (MDPE ROTOMOLDING) is one of the types of polyethylene whose condensation range is 0.926–0.940 g/cm3.
This type of polyethylene has a relatively good moisture resistance. Its sensitivity is relatively less than HDPE. It also has better resistance to cracks caused by shocks.
MDPE or polyethylene with the medium grade is commonly used in the manufacture of plastic pipes and fittings.
MDPE is commonly used in gas pipes, bags, small films, containers, and so on.
The other name is “black alkathene”.
Typical Application:
Due to its high resistance to many solvents, its application is wide-ranging:
- Large containers
- Septic tanks
**This product is available in different Grades as well as from different Manufacturers. You can see these products at the ADDITIONAL INFORMATION (The next tab)**
*Please check the other similar products (light density polyethylene) here*
Additional information
| 3840UA (Tabriz- Shazand) | MFR: 4 (2.16 k/g) |
|---|---|
| 38504UV (Jam) | MFR: 4 (2.16 k/g) |
| LL32604UV (Jam) | MFR: 4 (2.16 k/g) |
General Inquiries
There are no inquiries yet.
