Brass Sections
Brass (Brass Sections) is an alloy group produced by mixing two copper and zinc metals. But in order to improve the brass processing capacity, 2 to 3 percent of the lead is also added to it. Brass sections that are extruded products include cross-sectional shapes.
Brass Sections
Brass (Brass Sections) is an alloy group produced by mixing two copper and zinc metals. But in order to improve the brass processing capacity, 2 to 3 percent of the lead is also added to it. Brass section that is extruded products include cross-sectional shapes.
This products consist of two major groups, which include forging and grinding sections. As well as, these products are normally used in water faucets and gas valves.
brass sections are delivered in different sizes. The range of production dimensions is as follows:
– Rebar: 1.5 to 90 mm
– Quadrangle: 4 to 80 mm
-And also, Hexagon: from 4 to 80 mm
Other sections according to customer’s request
Furthermore, other sections according to customer’s request**
**Please check out our website to witnessing the other similar products from the same company, click here Please**
| Alloy |
TPC |
|---|---|
| Denomination |
Tough Pitch Copper |
| ISO |
Cu-ETP |
| ASTM USA |
C11000 |
| DIN Germany |
E Cu 58 |
| JIS Japan |
C1100 |
| BS England |
C 101 |
| Copper (Minimum) |
99.90 |
| Phosphorus |
0.004 MAX |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
General Inquiries
There are no inquiries yet.
Related products
1000 Pounds sows Aluminum
Today, aluminum is considered as one of the most expensive metal in the world. Iran is one of the largest and most prominent producers of pure 1000 Pounds sows Aluminium in the Middle East.
"South Horoz Co. & Almhadi Co. pure aluminum ingot is available in the best quality and supplied to the customer in two grades" 50 pounds ingots 1000 pounds sows
Copper Sections
Copper sections, according to their type of use, can be delivered in alloys and in various shapes. But the main use of copper sections is to produce flat wires that are used in the construction of transformers. Other uses are copper sections for copper screws and rivets used in electrical industries.
